AUTONET TV

Restore Your Get-Up-and-Go (Fuel and Air Induction Cleaning)

You may have heard the old saying, "My get-up-and-go got up and went." If your vehicle's engine's fuel economy is noticeably worse, your engine is idling roughly or stalling or your vehicle's acceleration isn't what it used to be, ask your service advisor if you might need your vehicle's fuel and air induction systems cleaned.

As the hours pile up on your engine, carbon deposits can build up.  It's not unusual for some of the impurities and additives in fuel to leave behind a black residue that eventually will negatively affect your fuel economy and performance. Maybe you're noticing your engine is harder to start, you hear knocking or pinging in your engine and your vehicle just doesn't have the pep it used to.

While it's a sophisticated process with a lot of components, a gasoline engine essentially produces power by drawing in air from the outside and mixing it with fuel in the cylinders where this blend of fuel and air is ignited by spark plugs in synchronized explosions.

The fuel and air enter your engine through the fuel induction system and air induction system. Because of things like high operating temperatures and impurities, carbon in the fuel can leave behind dark, sooty deposits in the fuel induction system such as the fuel injectors and the throttle body. These and other residue reduce your engine's efficiency and performance. Our service center can use special fuel injector cleaners to remove those deposits from your engine.

The technician may manually clean some of the deposits and also put a fuel additive in the fuel tank that will get rid of other deposits that are still in the fuel system

Keeping the air induction system clean is also important.  A technician can use a liquid cleaner specially designed for the job. Not only can this improve your fuel economy, it may also reduce exhaust emissions and help your engine last longer.

Most gasoline now contains detergents that help reduce or prevent these problems, but direct injection is now being used in more vehicles that are more susceptible to clogging. Ask your service advisor if your vehicle could benefit from fuel and air induction cleaning. 

TJ's Auto Center Inc.
3427 E. State St.
Rockford, Illinois 61108
815-399-2886

Steering You Right (Power Steering Signs of Problems)

Nearly every modern vehicle on the road today has power steering, a wonderful invention that makes steering take far less effort than it did in the "good old days."  Today, we take our steering for granted: until something goes wrong, that is.

Most power steering these days is rack-and-pinion, the rack being a metal bar between the front wheels with notches in it and the pinion being a gear whose teeth fits into those notches.  Adding power assist makes it easy to turn. That assist comes in the form of hydraulic fluid that is pressurized by a pump powered by the engine, an electric motor that adds a power assist or a system that uses both an electric motor and hydraulic fluid.

Your vehicle usually gives you a heads up that something is going wrong with its steering. Here are a few signs to look for:

• A humming, whirring, rubbing or grinding sound coming from you engine compartment when you turn.
• Signs of hydraulic fluid leaking, such as wet spots under your vehicle.
• The smell of burning oil while you're driving.
• Steering wheel hard to turn or vibrating.

If you notice any of these signs, it's a good idea to have a trained technician check them out.  They may be signs of:

• Power steering pump going bad
• Steering rack or gear seals wearing out, causing them to lose hydraulic fluid
• Broken fluid hose
• Defective power steering cooler
• Loss of pressure in the power steering gearbox
• Worn out steering pump belt
• Failing electric power steering motor

It's important to have these checked out sooner rather than later. You need to be able to steer properly in order to drive safely. Plus, some of these problems can cause more serious—and expensive—damage if they're not fixed.  Power steering is a wonderful feature of your vehicle.  Keep it well maintained and it will steer you right.

TJ's Auto Center Inc.
3427 E. State St.
Rockford, Illinois 61108
815-399-2886

Giving CV Joints the Boot! (CV Joint and Boot Replacement)

Ever wonder how your vehicle’s transmission is connected to your wheels? After all, when you hit a pothole or some other uneven part of a road’s surface, there has to be something that can maintain the connection between the transmission and the wheel yet keep everything moving at the same speed. 

That very cool device is called a CV joint, a kind of driveshaft running to each wheel.  The CV stands for constant velocity because it keeps the drive wheels moving at a constant speed (velocity).  They’re used mostly on front-wheel drive vehicles but also in rear-wheel and all-wheel drive vehicles.

The joints move up and down and adjust to bumpy surfaces.  Plus, they are covered in a rubber boot which protects them from road debris and also holds lubrication in.  There’s a CV joint and boot on the transmission side and one on the wheel side.  Unfortunately, the spot that usually fails first is that rubber protective cover (the boot).  After a lot of wear, tear, bumps, road hazards, heat, and you name it, the rubber rips and the lubrication leaks out.  At that point, it must be replaced. 

Here are signs to tell if your CV joint is bad.

• Your vehicle is pulling to one side as a wheel loses power or you feel a vibration while driving.
• You see grease on the inside or edge of your tires.  
• Your front tires won’t point in the same direction.
• You hear grinding or clicking when you turn.

Sometimes if a broken boot early is caught early, a technician can pack in new grease and replace just the boot.  But if the lubrication has leaked out and the joint is already wearing badly, the CV and boot both have to be replaced.  Give your vehicle the boot (as in a new boot) and CV joint, and you’ll be back on the road to your next destination.

TJ's Auto Center Inc.
3427 E. State St.
Rockford, Illinois 61108
815-399-2886

Bad Vibrations (Brake Rotor Replacement)

If you’ve ever stepped on your brake pedal and felt your vehicle vibrate, that’s a signal that you shouldn’t ignore.  A pulsating brake pedal is a sign that something is wrong.  Braking action should be smooth, sure, and quiet, not shaky and noisy.

Most newer vehicles have disc brakes, called that because they have a round, flat disc connected to each wheel.  Those discs are the rotors. Other parts called brake pads are squeezed against those discs when you press on the brake pedal.

Remember that vibration we mentioned? That can be caused by the rotor not having a straight, true surface. Rotors can heat up from friction and warp.  They can become thinner from constant wear.  Rotors can rust from the elements they’re exposed to, such as rain, snow ice, and salt.  They can get grooves in them from so many contacts with the pads. 

The signs of worn rotors are vibrations, grooves on the rotor (which you can see sometimes through open spots in the wheel) noise such as squealing or scraping when you brake, and increased stopping distance.   

While it used to be common for rotors to be machined (shaved down to restore their flat surface), newer vehicles have thinner rotors, so your service adviser may suggest you replace rotors when they start showing signs of significant wear.

Brakes are important safety equipment for every vehicle.  They enhance your control while driving, so it’s important that they be regularly inspected and maintained.  A good time is when you have your tires rotated. A technician can then look at all components of your brakes and recommend any service you may need to keep your brakes in top shape.

TJ's Auto Center Inc.
3427 E. State St.
Rockford, Illinois 61108
815-399-2886